Radiators

  Rocore Engine & Systems Cooling
 
Rocore manufactures a broad range of Copper Brass radiator products meeting application requirements from small power generation sets to large vertical and horizontal cooling units, in addition offering one of the largest ranges or replacement serpentine on & off high way replacement radiator cores (Please see after market section with down loadable catalogue). Rocore design our Copper/Brass radiator products to meet the specific performance and packaging requirements of a demanding customer base, general product information is contained on the following pages, please contact us with regard to your specific requirements.


•  Product Range
•  RH units (Remote Horizontal)
•  Installation kits
•  Mechanically bonded


  Product Range & Description
 
Model "N" Series
Engine mounted & driven fan 2 thru 50 sq.ft Standard core size. Core guard & fan guard To OSHA requirements (typical all models)

 Model "F" Series
Engine driven, fan on radiator 7 thru 80 sq.ft standard core size. High performance fan - heavy duty pillow block bearing - belt tension adjustment.

 Model "V" Series
Vertical Remote - Electric motor - direct Driven fan 2 thru 50 sq.ft standard core Size. Fan, motor & radiator support structure.
Model "H" Series
Horizontal remote - Electric motor - direct Driven fan 2 thru 50 sq.ft standard core size. Standard surge tank - optional surge tanks available. Fan, motor & radiator support structure.
 Model "VB" Series
Vertical remote - Electric motor belt driven fan 21 thru 80 sq.ft standard core size. Belt tension adjustment - with belt guards. Fan, motor & radiator support structure.
 Model "HB" Series
Horizontal remote - Electric motor belt driven fan 21 thru 80 sq.ft standard core size. Belt tension adjustment - with belt guards. Fan, motor & radiator support structure. Standard surge tank - optional surge tanks available.
 
Model "RH" Series
Horizontal Remote - multi fan - 15 thru 135 sq.ft standard core size. Aluminum fin round tube - up to 250 psi pressure, 300°F.
 Vehicle Series
Heavy duty off highway or over the road Vehicle radiators.
  



  Model RH (Remote Horizontal)


Specifications
   •  Radiator with forced draft airflow and vertical discharge
   •  Size ranges 15 to 145 square feet of face area
   •  Design pressure 250 PSIG
   •  Design temperature 300º F
   •  Capable of 100 mph wind loads
   •  Cooling core of seamless copper tubes mechanically bonded to aluminum plate fins
   •  Core encased in galvanized steel frame and supports
   •  Single or multipass design
   •  Cast aluminum fans in spun venturi openings for efficient operation
   •  Guards on fan openings, core and manifold ends
   •  Quiet, standard, high performance fans and motors available
   •  TEFC fan motors pre-wired to junction box on end of unit

Options
   •  Expansion tanks
   •  Low level switches
   •  Fluid connection assemblies
   •  Fan control panels

Applications
   •  Engine cooling
   •  Process cooling
   •  Co-generation systems/heat recovery systems
   •  Compressor cooling
   •  Heat treating furnace cooling
   •  Closed loop cooling systems

Benefits
   •  Modular assembly
   •  Low profile
   •  Rugged light weight design
   •  Corrosion resistant galvanized steel construction
   •  High strength efficient core for maximum performance
   •  Multiple fans for quiet efficient control of cooling temperature

 


 

Installation Accessories

Accessories components are designed for specific engine applications


Radiator support
Constructed of structural steel with all necessary attachments and hardware to mount to engine rails.



Fluid connections & Fuel coolers
Connection kit consists of steel tubes formed, welded, and leak tested, along with required engine and radiator couplers.

Fuel coolers sized to meet specific performance requirements.



Drive components
Includes fan, idler and engine sheaves, high horsepower stub shaft and mounting hard ware, belts and belt guard.



Fuel cooler assembly
Installed on the radiator with connections extended to outside of radiator.

Low level switch
Mounted on radiator or optional surge tank.

 


  Mechanically Bonded Radiators



Typical construction
   •  Tubing: .012" high frequency welded red brass
   •  Fins: 9 or 10 FPI copper .0035
   •  Headers: .625" universal mill steel bar

Standard EMD single, double and triple six row available
   •  R27446 single 28" x 30"
   •  R25669 double 55" x 30"
   •  R27180 triple 83" x 30"

Custom sizes and shapes available on request
 
^ Return to Top




       © Rocore